Full Set of Automatic Mineral Water Bottling Plant Machinery 3000bph

(Output:2000-3000B/H based on 500ml Bottle)

Production Process:

                           Semi-auto Bottle Blowing Machine

                                                                 ↓

      RO Water Purification System  →   Automatic 3 in 1 Filling Machine    →   Inkjet Printer

                                                                                                                                                                     ↓ 

                           Label Steam Shrinking Tunnel  ←  Semi-automatic Sleeve Labeling Machine

Part One: RO Water Purification System, Model: RO1000I (2000L/H)

1. Design Basis

1.1 Produced water’s application: Bottle drinking water
1.2 The capacity of produced water: 2000L /H

1.3 System Configuration: Pretreatment + One Stage Reverse Osmosis Desalination System.

1.4 Designed recovery: 50-65%.

1.5 Rejection rate: ≥ 97%

1.6Voltage: 3 phases, 380V, 50Hz; Power: 5 KW (Can be customized at your country’s voltage, please tell us about it when ordering)

2. Working Process:

Water Source → Booster Pump →Quartz Sand Filter→ Activated Carbon Filter →Precise Filter →High Pressure Pump →RO Membrane→Pure Water→ Filling Machine

                                                 ↑Ozone Generator

                                                 ↑UV Sterilizer

3. Main Components of The System

4. Picutres:

Part Two: Semi-Automatic Blow Molding Machine (Model: HY-B-II)
Specification::
HY-B-Ⅱ semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
* Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
* The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
* The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
* The machine can be operated in the step-by-step mode and the semi-auto mode.
* The machine is small with low investment, easy and safe to operate

Main parameter:

Components List

Part Three: 3-In-1 Bottle Washing, Filling And Capping MachineModel: CGF8-8-3

CGF8-8-3 PET bottle Washing / filling / capping machine is a three-in-one combination of our advanced technology of atmospheric pressure filling technique, and it is the application of independent research and development, it will be the same with pure water and mineral water advanced bottling models. This machine adopts conveying way for clip bottles’ lips, only need to replace very few parts, it can be applied to a variety of bottle type, smooth delivery. Filling method is Atmospheric pressure filling.

* The main frame adopts structural steel, 304 stainless steel exterior layer, 304 stainless steel frame, round steel adjustable feet.

* Conveying system adopts star wheel, smooth transmission, stainless steel chain, it will be a smaller deformation.

* Number of washing clips is 8, 304 stainless steel chassis wash pipes are heat-resistant.

* Number of filling valve is 8, and parts contacted with product are 304L stainless steel. Inner surface is dealt with polishing. There is stainless steel returning tube, no dead space.  

* Number of capping head is 3, screw head using magnetic torque device to facilitate torque adjustment, it can be set the size of the first torque of capping in accordance with the actual production needs.

Power system

* Main Motor and Gearbox with frequency controller, transmission for sports bodies are gears, run smooth, all-round star bottle components are engineering plastics, with security agencies.

* With PLC, transducer, relay, photoelectric switch, imported sensor switch relay components, touch screen operation panel, pneumatic components imported.

Technical Parameter

Overall dimension(mm):2000*1550*2000

 Production capacity:2000-3000 b/h(500ml)

Suitable bottle sizes: 300ml-1500ml

Bottle diameter: Φ50-Φ88mm, bottle height: 150-320mm

 Pressure of air source: 0.6Mpa

Used air:0.3m²3/min

Water pressure of washing bottles:0.2-0.25Mpa

Used water of washing bottles:0.5 T/h(Max. it can be adjusted)

Filling mode:Atmospheric pressure filling

Total capacity of motor:3.8Kw

Rating pressure;380V50Hz

The machine includes: 2M air conveying system in front, 2M conveying system for bottles out in back, cap elevator (air conveying). 

Part Four: Manul Sleeve Labeling Steam Shrinking Tunnel

Main Components: 

1) Additional Conveyer 3meters

2) Label Shrinking Tunnel

3) Steam Generator(12kw)

Part Five:  Semi-auto Shrink- Wrapping Packaging Machine(Model: JMB-80A)

1. Scope of Application:

Auto shrink- wrapping machine series are suitable for the package of  bottled water ,beverage,household,electric appliances,electrical units,floor boards,pottery and so on.

2. Feature:

1) It can make package perfect whatever it is without pallet, cartoon, rectangle, round or flat shape.

2) It has the advantage of less cost and better appearance.

3) Replace film conveniently. It has failure alarm, lock device, reliable running.

4) Automatic film feeding and cutting function, and the length of film for feeding and cutting is adjustable.

5) With stainless steel heating tube to ensure the high efficiency even heat, not easy to break and easy changing.

6) The whole machine applies super steel and stainless steel, with compact and endurable structure. This new type of wrapping machine is the ideal equipment for beverage filling line.

3. Technical Diameter:

5 Packing Type:

a)300-600ml:Big package: 4×6,4×5;Small package: 3×4,3×5.

b) 700-2000ml:Big package: 3×3,3×4;Small package: 2×2,2×3.

Pictures: