1.working principle
When the machine is working, the wire is in place, the spindle motor starts,
after the material was pushed into the top of the forming device, through the
public seat and the base of the gap forward and wrapped on the wire, driven
by wire flying.

2.Interface description

3.The steps of machine boot

3.1.Wearing the wire and enter the interface

 

3.2 Adjusting the jet pressure by Manually

Entering the interface below

 

3.3.Opening the oven and the conveyor belt manually

3.4.The Machine starting production

Manual / automatic transfer switch to automatic transmission, and then enter the following interface press the key 1 # to start production. Half-way production can be stopped by 3 # or manual / automatic transfer switch to manual, the program will let the product completely go to the collection disk to stop the conveyor belt.

 

If you need more information, please check here!

Liuyang Sheng Kai Machinery Manufacturing Co.,Ltd is an oiginal manufacturer in making machine industry for more than 10 years. 

We supply various machines and complete production lines. Our main product: fireworks machines, packing machines,non-standard machines. 

Our products have been exported to Hungary, Greece, Egypt, Indonesia, India, Vietnam and so on,since 2006, we had been creating firework machines for more than 1000 factories to replace man power. Granting them advantages in lowering production cost thus improving effeciency and competitive strength in the market. Contact us for greater good now!