IRD1345 provides operators an ideal solution for multi receiving, descrambling, remultiplexing and decoding operations. By the quad DVB common interfaces, IRD1345 could decrypt multiple services in 4 transport stream. IRD1345 is also a professional IRD that features a broadcast quality decoder for MPEG-2 and MPEG-4 AVC/H.264 in both Standard Definition and High Definition formats, and provides a variety of industry standard digital and analog outputs, including 4 separated CVBS video, analog Audio, SD-SDI and HD-SDI. The unit also performs HD down-conversion and aspect ratio adaptation of HD programs to generate professional quality baseband analog video and audio outputs and TS over IP operations for easy integration with existing cable network infrastructure. This all-in-one architecture makes the IRD1345 an ideal product for distribution and contribution networks.
●Quad Tuner Input, Supports variety of input options DVB-T2/S2/S/C/DTMB/ATSC/ISDB-T, DS3/E3
●Support DVB-S2 Input Stream Identifier (ISI, optional) and DVB-T SFN MIP pass through
●SD/HD MPEG-2 and MPEG-4 AVC/H.264 digital video decoding
●4*HD/SD-SDI, 4*Composite, 2*ASI outputs
●Two Audio PIDs decode or pass through (compressed) for each SDI output
●Built-in 2*TS re-multiplexer, one receives from Tuner1, Tuner2, IP, CI1 and CI2 Inputs, the other receives from Tuner3, Tuner4, CI3 and CI4 Inputs
●Support 2*IP streaming in & 2 IP out at full duplex mode, or 218 * channels IP out at IPTV mode, or 11*channels IP out at DVB mode
●On site software update through IP or USB
●4*DVB-CI Slots, multi-program decryption, BISS-1 and BISS-E decryption
●Dynamic PMY detection and automatic updating
●Supports VBI TELETEXT, EBU/DVB Subtitle, Closed Caption
●Remote Control and Supervision by SNMP, HTTP WEB and proprietary HDMS software
●PCM audio embedded in SDI and HD MI outputs
●AC3 and D E audio can be passed through by SDI
●VBI TELETEXT, WSS and Closed Caption embedded in SDI
●RSSI, received Eb/No & BER monitoring
●Redundant power supply
DVB-S/S2 Tuner Input |
DVB-S/S2 Tuner Input (ISI Factory Optional) |
Connector Type: 4*F type female 75Ω for Input |
Input Level : -25 ~ -65dBm |
Input Frequency Range: 950 ~ 2150MHz |
Symbol Rate: 2 ~ 45MBaud |
Roll-off Factor: DVB-S QPSK: 0.35,DVB-S2 8PSK: 0.35, 0.25, 0.2 |
FEC Code Rate: DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8 DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9,9/10 DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 |
LNB Polarity Selection Voltage: 0, 13V, 18V selectable |
LNB Band Selection Tone: 0/22KHz selectable |
Satellite Selection Command: DiSEqC 1.0 |
ISI ID: 1 ~ 255 user configurable |
DVB-C Tuner Input |
Connector Type: 4*F type female 75Ω for Input |
Input Frequency Range: 51 ~ 862MHz |
Input Level: 45 ~ 75dBμV |
Symbol Rate: 1 ~ 7MBaud (ITU J.83 Annex A) |
Constellation: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM |
Bandwidth: 6MHz, 7MHz, 8MHz |
Input Return Loss: 7dB (typ.) |
DVB-T/T2 Tuner Input |
Connector Type: 4*F type female 75Ω for Input |
Input Frequency: 104 ~ 862MHz (VHF/UHF) |
Input Level: -20 ~ -70dBm |
Constellation: DVB-T: QPSK, 16QAM, 64QAM DVB-T2: QPSK, 16QAM, 64QAM, 256QAM |
Bandwidth: 6MHz, 7MHz, 8MHz |
FFT Mode: DVB-T: 2K, 8K DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K |
Guarding interval: DVB-T: 1/4, 1/8, 1/16, 1/32 DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128 |
FEC Code Rate: DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8 DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 |
Input Return Loss: 7dB (typ.) |
DTMB Tuner Input |
Connector Type: 4*F type female 75Ω for Input |
Input Frequency Range: 46.5 ~ 866MHz |
Input Level: -87 ~ -29dBm |
Symbol Rate: 7.56MBaud |
Bandwidth: 6MHz, 7MHz, 8MHz |
Constellation: 4QAM-NR, 4QAM, 16QAM, 32QAM, 64QAM |
Guard Interval: PN420, PN595, PN945 |
Roll-off Factor: 0.05 |
Interleaving Depth: 240, 720 |
FEC Code Rate: 0.4, 0.6, 0.8 |
ATSC Tuner Input |
Connector Type: 4*F type female 75Ω for Input |
Input Frequency Range: 54~864MHz |
Input Level: -75 ~ -7dBm (ATSC 8VSB) |
Symbol Rate: 10.762MBaud |
Constellation: 8VSB |
Roll-off Factor: 0.115 |
Bandwidth: 6MHZ |
DS3 Input (Option) |
Connector Type: 4*BNC female, 75Ω, including loop through |
Standard: Compliant with ITU-T G.703 |
Frame Structure: Compliant with ITU-T G.752 and ITU-T G.804 |
Bit Rate: 44.736Mb/s |
TS Processing |
TS Input Management: Demux and Remux among IP input and CI Inputs |
TS Output Management: Demuxand Remux for 4 independent ASI outputs |
Service and PID Management: Remux, filtering and remapping |
PSI/SI: PSI/SI table regeneration, NIT and SDT edition, LCN Edition and Re-generation |
Descrambler: DVB Common Scrambling Algorithm (CSA) |
BISS Mode: BISS-1, BISS-E |
Common Interface: Double PCMCIA slots, compatible with major CACAMs in the market |
ASI Input & Output |
Connector Type: 2 independent BNC female, 75Ω |
Standard: DVB-ASI, EN50083-9 |
Output Bit Rate: ≤ 100Mb/s |
Digital Video Processing |
Video Standard: MPEG-2 (MP@ ML for SD, MP @HL for HD) MPEG 4/H.264 AVC Part 10 (MP@L3 for SD, HP @L4.1 for HD) |
SDI Video Resolution: 1080i×30, 1080i×29.97, 1080i×25, 720p×60,720p×59.94, 720p×50, 576i×25, 480i×29.97 |
Video PID Bit Rate: ≤ 60Mb/s |
HD/SD-SDI or ASI Output |
Video Standard: MPEG-2 (MP@ ML for SD, MP @HL for HD) MPEG 4/H.264 AVC Part 10 (MP@L3 for SD, HP @L4.1 for HD) |
Audio Standard: MPEG-1 layer-I/II, MPEG-2 layer-II, LC-ACC,HE-ACC |
Connector Type: 4 pair of SDI output, BNC, female, 75Ω |
SD Standard: SMPTE 259M, 270 Mb/s (10bit) |
HD Standard: SMPTE 292M, 1.485 Gbit/s (10bit) |
Level: 800mV p-p |
Embedded Audios: |
1.MPEG-1 Layer 2 a. 2 stereo pairs (Stereo, Dual Mono Left, Right) |
2.D Digital (AC3) a. 5.1 down-mix to 2.0 (Stereo, Dual Mono, Left, Right) b. D Digital Audio Pass-through |
3.D Digital Plus (AC3+) a. 5.1 down-mix to 2.0 (Stereo, Dual Mono, Left, Right) b. D Digital Audio Pass-through |
4.MPEG-2 AAC/MPEG-4 HE-AAC v1/v2 a. 5.1 down-mix to 2.0 (Stereo, Dual Mono, Left, Right) b.2.0 (Stereo, Dual Mono, Left, Right) Embedded Ancillary Data: Teletext,WSS, CC |
Analog Audio Output |
Connector Type: 2*D-sub 9 male included 4 pairs of stereo audio with XLR adaptor cable |
Output Impedance: 600Ω for balance |
Output Mode: Left, Right, Dual Mono, Stereo |
Number of Output: 4 pairs of stereo audio outputs (4 Audio PIDs or 8 channels are decoded) |
Cross Talk Among Channels: >70dB |
THD: <0.3% @ 400Hz, 1KHz test tone |
Frequency Response: ±0.5dB over 20Hz ~18KHz |
Output Leve: 0dBm in 600Ω (0dBu), adjustable range ±I0dB |
Analog Video Output |
Standard: 4×HD MI 1.3 interface (up to 1080i) |
Video Resolution and Frame rate: 1080i*30, 1080i*29.97, 1080i*25,720p*50, 480p*60, 576p*50, 576i*25, 480i*29.97 |
Audio embedded: 4* stereo |
Digital Audio Output |
CVBS Connector: 4×BNC female 75Ω |
CVBS Standard: NTSC, PAL, and SECAM |
CVBS Resolution: 576i×25, 480i×29.97 |
Norminal Output Level: 1.0 Vp-p±5% (with standard test stream) |
Frequency Response: <±1 dB, at 5.5 MHz for PAL/SECAM, 4.2MHz for NTSC |
Chroma-Luma Delay: <±30 ns |
Field Time Distortion: <2% |
Line Time Distortion: <1% |
Short Time Distortion: <2% |
Differential Gain: <3% |
Differential Phase: <2° |
Signal to Noise Ratio: >55dB (luminance weighted) |
Ancillary Data Processing |
Subtitle: DVB, EBU |
VBI: Teletext, WSS |
Closed Caption: EIA 608, EIA 708, EIA 608-to-708 |
TS over IP |
Connector Type: 2*RJ45, 100-1000 Base-T |
Effective Bit Rate |
1.TS/IP Full duplex mode IEEE802.3, 10/100/1000 Base-T 2 IP in and 2 IP out, MAX bit rate: 120Mb/s*4 ProtocalUDP/RTP, STPS or MPTS; ICMP, ARP, IGMPv2,IGMPv3 |
2.TS/IP IPTV mode TS/IP out only, IEEE802.3, 10/100/1000 Base-T 128 IP out, second port backup, MAX bit rate: 400Mb/s Protocal: UDP/RTP, STPS or MPTS; ICMP, ARP, IGMPv2,IGMPv3 |
3.TS/IP DVB mode TS/IP out only, IEEE802.3, 10/100/1000 Base-T 11 IP out, second port backup, MAX bit rate: 600Mb/s Protocal: UDP/RTP, STPS or MPTS; ICMP, ARP, IGMPv2,IGMPv3 |
Control & Monitoring |
Connector Type: 1×RJ-45, 10/100 Base-T, for equipment IP Control |
Remote Control: SNMP, HTTP (Web Interface) |
Proprietary HDMS (Headend Device Management System) |
Local Control: LCD display and 6-key keypad |
Serial Port: 1×RS-232 D-sub female, for debug use only |
Equipment Upgrade: Embedded FTP loader and Telnet |
Environment |
Power Supply: AC 90V ~ 250V, 50/60Hz |
Power Consumption: 24W (exclusive of LNB power) |
Operating temperature: 0 ~ 45℃ |
Storage temperature: -10 ~ 60℃ |
Operating Humidity: 10 ~ 90%, non-condensed |
Dimension: 430mm x 255mm x 44mm |
Weight: 3.5kg |
Upon your requirement, we can help you search the most cost effective method to delivery. By DHL, TNT, FedEx, UPS. by air. by see, According to your specific requirement, we will help you search the most cost effective and secure type of shipping.
Why you choose us ?
1, 10 years experience in video delivery infrastructure solutions
2. Excellent pre-sale and after-sale Technical team
3. High quality with competitive price
4. Fast feedback and fast delivery
5. OEM supported
What we do?
1. Carrier grade broadcast cable tv equipments: Broadcast Encoder and Transcoder,Professional IRD,Mux and Scrambler,Modulator,Transmitter and Set top box
2. Carrier/Economy grade multiscreen iptv encoder/transcoder
3. Digital Video Modulator with HD MI/CVBS inputs,DVB-C/T/ISDB-T/ATSC modulator in 1RU/Compact Chassis
4. Broadcast DVB-C/T2/MMDS solutions
5. Carrier grade iptv solutions
6. Hotel tv systems base on ALL-IP or ALL-RF solution
7. Docsis3.0 CMTS Over Coaxial Cable to Internet
8. OLT and ONU GEPON
Contact person | Joyce Chen |
Email | Sale02(a)dibvision.com |
Skype | hzcx_42200 |
Whatsapp | +86- |
Wechat | foreveryoung-zijin |