QY-800High pressure wall putty spray machine is a screw-type high-pressure mortar spraying machine, with advanced technology, simple operation and maintenance, it can be operated skillfully without special training . QY-800 High pressure wall putty spray machine adapted spraying material included: putty powder, dry mortar, cement mortar, thermal insulation, waterproofing materials, fireproof materials, insulation materials, sound-absorbing materials and other water-soluble material. QY-800 Wall putty Spray machine is a continuously working mixing machine, designed for the application of any type pumpable dry ready-mixed mortar based on cement, gypsum and insulting mortar. The machine consists of units, permitting easy and comfortable transport due to their small and handy dimensions and low weights.

Features:

 1. The integrated machine with mixer, self-suck water pump, mini compressor 

     and rotor/stator.

 2. Small and handy dimension and low weight, quickly and easily transport even 

     in the most confined spaces.

 3. The rotor / stator pump ensures the material is pumped and sprayed out conti

     -nuously and evenly.

 4. The machine always works with efficiency and silence.

 5. With air vavle remote-control function.

 6. The machine consists of portable units, permitting easy to operate and take 

     maintenance and easy to use in any circumstance.

Technical data:

Construction method:

1. Before starting, add fresh water into the hopper and regulate the speed to the middle-high speed in order to achieve the effect of wetting pipe, only a short running and then draining the water.

2. Putting the even material stirred into the hopper, and then locking pulp exit of main machine and the pipe & Nozzle.

3. Before spraying, filling the pressure of air compressor to 8kg (matched air compressor 0.26-0.36m) and then connected to the nozzle.

4. After connecting to power, putting the gunpoint aiming the hopper, adjusting the air pressure and the speed until achieving the best state of fogging, shutting down the machine but non-stop wind.

5. After the accurate Debug, immediately move the nozzle and spray jets to the construction site work.

6. During the construction process, the pipe is filled with paints, not suitable for parking too long. If the power is failure, you should immediately dismantle the pipe to clean.

7. If filling pressure in the pipe, before dismantling & cleaning, you must put the cloth on it to protect your eyes, avoiding injury.

8. If starting the machine fails, first check whether the fire drills is broken or not and should replace it immediately.

9. Cleaning the body during the working or completion, making sure no wetting the electric drill & box, avoiding damage.

10. After completion of working, must clean up the hoppers, pipes, nozzles, and rotary joints so as to work tomorrow

11. If detecting the exit of coating is weak power after a long time to work, you have to replace the pressure pump.

12. If it suddenly appears without feeding material in the work, while motor is still working, it proves that the nozzle has been plugged. You should immediately stop working and clean the nozzle, and then continue to work.

13. The nozzle is damageable (including the pressure pump). The standard nozzle pore is 4mm. When the fogging of nozzle is not satisfactory, you should immediately replace the nozzle.

14. When manual operate, you should wear a safety helmet, glasses, and protective clothing.

Attention:

1. The construction site must wear protective equipment (such as gloves, masks, goggles, safety helmet)

2. Water and electricity should be provided on site.  

3. The hand shall not be in the hopper when driving.

4. The construction site should be safe, covered and smooth.  

5. Machinery and circuit should avoid to expose in wet and open place.

1. Zhengzhou MG Industrial Co., Ltd understands your requirements and our solid solution ensures that our products always runs perfectly for you!

2. We are staffed 24 hours a day, 365 days of the year. When you need assistance our staff is always ready to deliver friendly and helpful responses as quickly as possible. Any support request submitted is guaranteed to receive a swift response.

3. Our products are all self-developed and innovated, ensuring optimum performance. OEM and other customized modifies are available for our clients.

4. At this exact moment we already export our products to over 80 countries all over the world. Thousands of our clients and partners give us excellent feedbacks.

5. CE Certification and many other qualifications are obtained.

1) Unpon got your inquiry, We will reply to you in 24 hours.

2) Assist clients to prepare for the first construction scheme and supply foundation drawing.

3) Oversea installation and provide technical exchange, train client to operate the machine.

4) Supply spare and accessory parts at favorable price for long-term.

5) Spare part are original, authentic, good quality, can be avaible from stock, and sent to client, immediately by DHL, EMS, Fedex, and by air, gurantee client to receive it in shortest time. Strict site quality inspection system:

Installation captain inpection: evaluate the installation level of dry mix mortar production line, Spot QA engineer inspection: Inspect the whole in installation process and key components.

Service engineer inspection: Inspect the debugging and running condition of whole production line. 

1. How many people that need to operate the plaster spraying machine?
    One or two workers can use it successfully.

2. The wall plaster machine, Can it be used to external wall ?
    The mahcine is used to spraying mortar for internal wall, external wall and ceilings.

3. Available shipment port?
    FOB SHANGHAI, FOB TIANJIN, FOB QINGDAO

4. What is the spraying height & convery distance?

    The dry mix mortar plaster machine, can convery the mortar to 50m, the height is 15-20m.

5. Waht is the raw material the mortar plaster machine can convery & spraying?
    Cement, sand and water; Lime, cement ,water, Putty; fire proof mortar ,etc.