Factory Price 30 T Air Cooled Chiller/Chiller High Temperature/Oem Industrial Chiller For Clean Laser
Product Description
A revolution in industrial cooling
The HL-i series of air cooled water chillers offer the most advanced design to satisfy today’s industrial cooling requirements.
The entire range is assembled with components developed with well know manufacturer. The complete HL-i series of packaged air cooled water chillers offer max efficiency together with total reliability and are manufactured to the highest quality standard.
This new generation of water chillers is built on years of experience, the result of which is the HL-i series which incorporates many major advanced standard features that other suppliers charge as extra.
Standard features:
Stainless steel large volume thermal buffer tank as standard across the entire HL-i series.
Coated condenser fins to protect the aluminum condenser from corrosion.
100% non-ferrous water circuit.
Strong galvanized epoxy coated steel frame construction.
Microprocessor control and alarm fault display.
Improved component positioning for easy service access.
Fully weatherproofed.
Industrial applications:
Plastics & Rubber Breweries &Chemical Printers& Pharmaceutical Engineering & Food & Lasers
Note: (1) water outlet temp =15°C ; water DELTA T = 5°C; ambient temperature = 25°C. (2) water outlet temp = 7°C; water DELTA T = 5°C; ambient temperature = 32 °C. (3) refers to compressor, fans, and pump absorbed power (4) refers in free field at 10m distance from the unit at condenser side and at 1.2m from the ground. (5) when water outlet temperature required at -5°C, need to change the LP switch from standard part No. T5303-23 (0.3MPa On, 0.15MPa Off) to part No. T5303-24 (0.2MPa On, O.IMPa Off), (except model HL i70~i180)
We reserve the right to change the specifications within this publication in whole or in part without prior notice. This brochure is to be used as a general guide and does not form any part of a contract or is binding in any way. We reserve the right when necessary, or at our discretion to use alternative suppliers components manufactured by other suppliers.