Engineered/Artificial/Recon Wood Veneer

2. Production Process

Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.

Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.

Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.

Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.

Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.

3.Pictures

4.Packing & Shipping of Engineered/Artificial/Recon Wood Veneer

QC & Certifications

We have 6 QC teams to inspection such as moisture control, glue inspection both before production and after production, material grade selection, pressing checking, and thickness checking.

Our aim is to supply high quality product with reasonable price.

Company Information

Weifang Sheng Geheng Imp. & Exp. Co.Ltd, is located in Weifang city, Shandong Province,China,near Qingdao Port, enjoying convenient transportation access. Our wood products mainly include film faced plywood, Commercial plywood, Chip board,Veneer,OSB, MDF, Finger joint plywood, etc. And our steel products mainly include PPGI, GI, Corrugated steel sheets, cold rolled steel coil, steel round bar, Deformed steel bar,wire rod, etc. Our products are widely used in office, household and construction fields.Depending on excellent quality and after-sales control service,we have gained good reputation from clients all over the world,especially, USA, Japan,Korea, Australia, India,Southeast Asia, Middle East, south America, Africa,etc.

We maintain "customer first, quality first" as our business purpose, and depend on advanced technology and scientific management. We are ready to cooperate with clients from all over the world and create good business in the future together.

Any enquiry, welcome to contact with us!