Function

H-voltage AC current measure,L-voltage AC /leakage current measure

AC current monitor online

Power Supply

DC6V Alkaline Dry Battery(1.5V AAA X 4)

Test Method

Clamp CT, Integral Method;hook the meter on the line to test,save the physical power of user.

Clamp Diameter

Φ68mm

Range of measurement

0.00mA~1000A(50Hz/60Hz Automatic)

Resolution

0.01mA

Shift

0.00mA~1000A Automatic Shift

Test Accuracy (23℃±5℃, ≤80% RH)

0.00mA~299mA: ±1%±3dgt 

0.30A~49.9A:  ±1.5%±5dgt 

50.0A~199.9A: ±2%±5dgt

200A~600A:    ±3%±5dgt   

601A~1000A:   ±4%±5dgt  

Display Mode

4 digital LCD display

LCD Dimension

Tester: LCD: 35mm×21.5mm

Meter Dimension

Tester: 218mm×135mm×60mm

Sampling Speed

about 2 times/second

Data Storage

99 Groups,during storage, the symbol “MEM” gives indication, “FULL” mark will flash to indicate the memory has been full.

PEAk Maintenance

Automatically maintain the height of the test value,usually in the test mode press PEAK key,LCD top right corner will display “PE”,that is, to keep open the PEAK function, then press PEAK key to cancel this function

Circuit Voltage

Test  insulating sheath wires(≤60kV)and bare wire t( ≤35kV)

 (operated with insulation rod)

Data Preservation

Under general test mode, press HOLD button to preserve data, “DH” symbol display. then press HOLD Key to cancel this function

Data Access

“MR” symbol indicates, it can read the stored data by turning upwards and downwards.

Overflow Display

Exceed measurement range overflow function: “OL  A” symbol display

Auto Shut Down

about 15 minutes after booting, the meter will shut down automatically, in order to decrease the battery consumption.

Battery Voltage

When the battery voltage is below 4.8V, the symbol of battery voltage“    ”will show to remind to replace battery.

Weight

Tester:about 620g (Including battery)

Total quality of meter: about 2.3kg(including insulation rod and battery)

Work Temperature and Humidity

-10℃ ~ 40℃; ≤80%Rh

Storage Temperature and Humidity

-10℃ ~ 60℃; ≤70%Rh

interference

No same frequency interference of 315MHz and 433MHz

Insulated Rod Dimension

Φ32mm, 1m/ Section(5 Sections)

Insulation Intension

Tester: AC 2kV/rms(Between core and shell)

Insulating rod: AC 100kV/rms (5 sections insulating rod all connections, between both ends)

Structure

Anti-Dripping Type II

accessories

Tester:1set;meter box: 1 pcs; Insulating rod (1m): 5sections;

Battery(alkaline battery LR03: 4pcs