Gas generator can transfer coal into coal gas, and can make full use of coal, which is new type energy-saving equipment.
Coal Gasifier
Single Stage Coal Gasifier
Our single stage coal gasifier uses air and vapor as the gasifying agents to produce mixed gas. It is suitable for gasifying coking coal, hard coke, etc. And is widely used in machinery, metallurgy, chemistry, glass, building materials, food, textile and light industries.
Features
Our single stage coal gasifier features low investment, good applicability, convenient use, easy operation, etc. Compared with direct coal burning, coal gasifier can save 20% of the fuel. Compared with oil furnace, coal gasifier can save more than 60% of the energy. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
Working Principle
Solid coal can be gasified into inflammable gases through vapor media. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a Nozzle. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace. Our single stage coal gasifier is widely used as steel rolling furnace, annealing furnace, forging furnace, steel pipe furnace, glass furnace, aluminum furnace, melting furnace, cooper furnace, pottery furnace, etc.
Double Stage Coal Gasifier
The working process of double stage coal gasifier consists of carbonization and gasification. During carbonization process, coal goes through intensive drying and low temperature carbonization, and gradually turns into semicoke. During the gasifying process, hot semicoke reacts with gasifying agent and turns into ash, which is discharged from ash bowl automatically.
In low temperature carbonization process, dry distillation gas is produced by evaporating water content. It is used as top gas of double stage coal gasifier and takes up 40% of the total gas amount. Dry distillation gas enjoys higher heat value (6700KJ/nm3) and low temperature (120° C), and contains large amount of tar, which is produced by low temperature carbonization. Tar is of good liquidity and can be gathered by electrostatic dust collector as chemical raw materials and fuels.
During gasifying process of the double stage coal gasifier, hot semicoke and gasifying agent conduct a series of chemical reactions including reduction and oxidation and produce gasified gas. This kind of gas is used as the bottom gas of double stage coal gasifier and takes up 60% of total gas amount. Its heat value is competitively lower (6400KJ/nm3); Its temperature is higher (about 450° C). Due to its less proportion of ash, bottom gas can be processed through cyclone dust separator and wind cooler. Users can use cold purified gas without adopting elutriation method, thus avoiding producing large amount of phenol water
Model | QM0.8 | QM1.0 | QM1.3 | QM1.5 | QM1.6 | QM1.8 | QM2.0 | QM2.4 | QM2.6 | QM3.0 |
Chamber diameter(mm) | 800 | 1000 | 1300 | 1500 | 1600 | 1800 | 2000 | 2400 | 2600 | 3000 |
Hearth active surface(m2) | 0.5 | 0.785 | 1.2 | 1.77 | 2.01 | 2.54 | 3.14 | 4.52 | 5.31 | 7.07 |
Suitable fuel | weak coherent gas carbon,anotherracite,burnt carbon |
Fuel granularity(mm) | 25-80 |
Fuel consumption quantity(kg/h) | 40-100 | 70-140 | 120-190 | 160-350 | 350-460 | 500-600 | 500-720 | 700-1040 | 850-1200 | 1700-2000 |
Gasifying agent | Air ,steam |
Coal gas yield(Nm³/h) | 140-350 | 245-490 | 420-670 | 560-1200 | 1200-1600 | 1500-2100 | 1750-2500 | 2500-3600 | 3000-4300 | 6000-7000 |
Coal gas calorific value(Kj/Nm³) | 5020-5670 | 5020-6000 |
Water jacket heating area(m2) | 4.02 | 5.02 | 6.78 | 10.37 | 11.06 | 12.44 | 17.58 | 21.87 | 23.69 | 30.16 |
Steam output (kg/h) | 60 | 80 | 130 | 200 | 220 | 260 | 350 | 420 | 600 | 840 |
Gas outlet temperature(℃) | (400-500) Depend on the coal | (400-500) Depend on the coal |
Gas outlet pressure(Pa) | <1000 | <980-1470 | <1470-1960 |
Gas exportation diameter(mm) | 219 | 325 | 325 | 426 | 426 | 529 | 630 | 720 | 820 | 1020 |
Air pressure(Pa) | <3000 | <4000 |
Saturated air temperature(℃) | 50-60 | 50-65 |
Ash tray rotational speed(r/h) | 0.177-1.77 |
Equipment gross weight(t) | 3.5 | 4.5 | 5 | 7.5 | 10 | 20 | 23.4 | 29.8 | 32 | 37.6 |
Motor power (kw) | <6 | <6 | <6 | <7 | <8 | <10 | <14 | <20 | <20 | <27 |
.