MainFeature
Specifications
Transport Stream Input Interfaces(Optional) | |
DVB-S/S2 Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 950~2150MHz Input Level -25~-65dBm Symbol Rate: 5~45MBaud/s for QPSK 10~31MBaud/s for 8PSK Roll Off Factor: DVB-S QPSK: 0.35 DVB-S2 8PSK: 0.35, 0.25, 0.2 FEC Code Rate: DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,8/9, 8/10 DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,9/10 LNB Polarity Selection Voltage: 0, 13V, 18V (optional) LNB Band Selection Tone: 0/22KHz selectable Satellite Selection Command: DiSEqC 1.0 |
DVB-C Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 48~860MHz Input Level: 45~75dBμV Symbol Rate: 1~7MBaud (ITU J.83 Annex A) Constellation: 16/32/64/128/256QAM Bandwidth: 6MHz, 7MHz, 8MHz Input Return Loss: 7dB (typ.) |
DVB-T Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 104~862MHz (VHF/UHF) Input Level: -20~-70dBm (Quasi Error Free, QEF) Constellation: QPSK, 16-QAM, 64-QAM Bandwidth: 6MHz, 7MHz, 8MHz FFT Mode: 2K, 8K Guard Interval: 1/4, 1/8, 1/16, 1/32 FEC Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 Input Return Loss: 7dB (typ.) |
TS Processing | |
| Descrambler DVB Common Scrambling Algorithm(CSA) BISS Mode: BISS-1, BISS-E Common Interface: 2*PCMCIA slots, compatible with major CA CAMs in the market |
Transport Stream Output Interfaces | |
ASI Output | Connector type: 2×BNC Female, 75Ω Comply with standard DVB-ASI, EN50083-9 |
Digital Video Decoding | |
| Video compression standard : MPEG-2(MP ML for SD,MP HL for HD) MPEG-4 AVC/H.264 Part 10(MPL3 for SD,HP L4.1 for HD) Video PID Bit Rate < 80Mb/s |
Digital Audio Decoding | |
| Output Audio channel: 2×digital Audio PIDs are decoded Sampling Rate: 32KHz, 44.1KHz and 48KHz Audio Bit Rate: 32, 64, 96, 128, 160, 192, 224, 256, 288, 320, 352, 384, 416 and 448 kb/s for MPEG-1 Layer I 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 and 384 kb/s for MPEG-1Layer II |
Video and Audio Outputs | |
HD MI Output | Connector: 1×HD MI, 1.3 interface Video Resolution: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94,720p×50, 480p×60, 576p×50, 576i×25, 480i×29.97 Audio Embedded one digital audio pass through |
Analog Video Output | Connector: 1* YPbPr, RCA interface, 75Ω 1*CVBS, BNC/RCA interface, 75Ω Video Standard: NTSC, PAL, and SECAM YPbPr Resolution: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94, 720p×50, 480p×60, 576p×50, 576i×25, 480i×29.97 Signal Level: I.0 Vp-p±5% Frequency Response <±I dB, at 5.5 MHz for PAL/SECAM, 4.2MHz for NTSC and 15MHz for HD YPbPr Chroma-Luma Delay <±30 ns Field Time Distortion <2% Line Time Distortion <1% Short Time Distortion <2% Differential Gain <3% Differential Phase <2° Signal to Noise Ratio >55 dB (luminance weighted) |
Analog Audio Output
| Connector: 1×XLR Male Socket, 2 pairs of RCA audio Output Impedance: 600Ω (balanced) Output mode: Left, Right, Dual Mono, Stereo Output Audio channel: 2 pairs of stereo audio outputs (2 Audio PIDs are decoded).
|
Ancillary Data Processing | |
| Subtitle DVB/EBU VBI Teletext, WSS, VFD, VPS Closed Caption EIA 608, EIA 708, EIA 608-to-708 |
General Options | |
Control and Monitoring | Connector: 1*RJ-45,10/100 Base-T for NMS Remote control: management via web browser and Proprietary HDMS Local control: management via Front panel and LCD RS-232: for debug use only Software upgraded by USB or FTP loader |
Physical and Power | Voltage: 90~260VAC, 50/60Hz Consumption: 24W Operating temperature: 0~45°C Storage temperature -10~60°C Operating Humidity 10~90%, (non-condensing) Dimensions: 483(W)mm*255 (L)mm*45mm(H) Weight: 4Kg |
Overview
The DMB-9020C HD Professional IRD integrates broadcast level Receiver, Demodulator, Descrambler and Decoder. The Rich variety of INPUTS models options enables it to meet the diversified broadcast applications and distribution applications, supporting the sources from satellite (DVB-S/S2), terrestrial (DVB-T), Cable network (DVB-C) or ASI for options. Moreover, the DMB-9020C adopts the state-of-the-art decompression technology, capable of decoding Multiple Format Transport Stream(TS) with ultra-low latency which involves HD and SD, MPEG-4 AVC/H.264 and MPEG-2, decoding and output the Composite video, Component(YPbPr),HD MI signal and two Audio signals(2 Audio PID) which can be selected by NMS based on the actual needs. Meanwhile, the security of content is all important, the HD Professional IRD supports all major Condition Access Systems including BISS 1,BISS E ,Irtedo, Viaccess and Conax etc. with 2 DVB-CI slots(Common Interface). All of above features simplify the digital TV headend system and distribution system, enhancing the stability of broadcast system, saving the cost and space for broadcasters, digital TV operators, video service providers.