DC48V Wall mounted air conditioner unit without outdoor unit
Technical Parameters
Model | 300W |
Rated Voltage(V) | DC-48V
|
Cooling Capacity(L35/L35) | 315W |
Rated Power(L35/L35)
| 105W |
Rated Current(L35/L35)
| 2.2A |
Refrigerant | R134a |
Working Temperature Range (℃) | -40~+55 |
Noise level(dB) | ≤60 |
Dimensions W*H*D(mm) | 221*386*136 |
Weight(kg) | 8.5 |
Color | RAL 7035
|
Mounting Method | Side mounting |
IP Grade | IP55 |
Life span | ≥10 years
|
Advantages
Energy Conservation and Environment Protection
Using Japanese Hitachi compressor
Using environmentally friendly CFC-free refrigerant R134a
Energy efficiency ratio (EER) UP TO 2.22
Small enthalpy difference
High sensible heat ratio design
Add protective shield
Intelligent Control
Temperature sensor calibration
Automatic starts when power on
Highest and lowest temperature thresholds setting and alarm detection
Fault alarm signal will be sent when the system's key components fault,
such as cooling unit, fan, compressor etc.
System will send alarm when temperature sensors fault and adjust air conditioner mode
according to the temperature inside and outside the cabin
Application Area
Cabinet air conditioner can be widely used in enclosed area for climate control,such as
telecom cabinet,battery cabinet,industry control cabinet etc.
The installation video link of Air Conditioner :
https://www.youtube.com/watch?v=uDTqMAoL9GQ
EMC Testing Data
Packing
Using high quality waterproof to pack the air conditioner first, then using melaleuca kraft packing, final using thick laminates.
Leading Time: Usually about 20 dyas. The exact lead time to be confirmed according to the quantity of the order.
FAQ:
1. Are you a factory or trading company?
We are a factory.
2. Can you accept OEM?
Yes, we can do OEM products as your requst.
3. Can I get some samples?
1) yes.
2) Regarding the courier cost: you can arrange a RPI (remote pick-up) service upon Fedex, UPS, DHL,TNT, etc. to have the samples collected; or inform us your collection account. Then you can pay the freight directly
to your local carrier company.
4. What is the lead time for samples?
The samples will be shipped to you within 5 days normally.
5. What is the lead time for mass order?
In general, it is about 20 to 30days according to your order Qty.
6. What is your payment method?
For sample order, we accept Western Union or T/T(bank transfer), For mass order, T/T(bank transfer) is accepted.
7. What is the minimum order quantity (MOQ)?
1 pieces.
8. What is the shipping port ?
Shanghai port or others as your request.
For more info.or customized industrial cooling solutions,please contact :