Introduction of air flow wood sawdust drying machine:

Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

Main Data of The Dryer: 

HJ-4:

HJ-6:

HJ-8:

HJ-10:

Hot airflow type:
A: Raw materials should be sawdust, suitable for drying the moisture20-50% Final moisture 8-12%;                           
B: Diameter of raw materials: <3mm & < 5mm;                     
C: Temperature of Hot Air: 180-250;                         
D: Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials;
E: This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency;
F: The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

Structure

Features of the Dryer:

1. The sawdust dryer have high degree of mechanization, large production capacity and continuous working.
2.With simple and excellent structure, the material running smoothly inside the sawdust dryer cylinder.
3.The sawdust dryer with less mechanical failure, low maintenance and low power consumption.
4.The dryer work uniformly and the drying product is very good.
5.With complete dust removal equipment and protect the environmental.
6. Sawdust dryer with no dust spilling.
7.Easy to operate and have a good operating environment.

The whole line of making wood briquette charcoal:

1.Crush the raw material into small pieces (diameter is about 3-5mm);

2.Dry the material by machine or dried it in the sun , till the moisture is less than 12%;

3.Put the material into feed let of briquette machine;

4.Produce the briquette stick from biomass material without any additive;

5.Carbonized the briquette stick.

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 30 years. 

There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , 

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) 

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) 

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

Our machines have the best quality and we have got many certification such as CE, ISO, BV.

ave got many certification such as CE, ISO, BV.

(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.