KA-S03B Ceiling Occupancy Sensor specifications:

1) Power source:220~240V/AC;100~130V/AC
2) Power frequency:50HZ/60HZ
3) Detection range:3~10mmax(<22°C)
4) Rated load:1200W(220~240V/AC);600W(110~130V/AC)
5) Time setting: min:5sec~10sec; Max: 6min~12±1min
6) Detection angle:360° (ceiling installation)
7) Ambient light:<20lux~>2000lux
8) Working temperature: -10~+40°C
9) Working humidity:<95%RH
10) Installation height:2.5~3.5m
11) Power consumption: working 0.45W (static 0.1W)
12) Sense motion speed:0.6~1.5m/s  

Package:

1) White box or customized color box

2) Carton size:50*38.5*36cm

3) Gross weight:15KGS

4) Quantity/carton:60pcs

Product introduction:

KA-S03B is a new saving-energy switch, it adopts good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, saving-energy and practical functions. One detector inside compose a wide
range detection field, it utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely, possessing the functions of power show and detecting show.
 

How to set KA-S03B:

1) SENS: Adjust detection range. Turn clockwise to increase it and turn anti-clockwise to decrease it. It is 1m
when turn to mini, and it is 8m when turn to max.
2) TIME: Adjust time setting of load work. Turn clockwise to increase it and turn anti-clockwise to decrease it.
The time setting is about 8±3min when turn to max. It is in impulse mode when turn to mini. In impulse mode
if you want turn to short time mode turn anti-clockwise a little when LED blink three times is ok.
3) LUX: Adjust working light. Turn clockwise to increase it and turn anti-clockwise to decrease it. When turn to
mini, it will only work below the light-control about 10LUX, when turn to max, it can work any light-control.  

KA-S03B Dimension:

KA-S03B Detection Description:

KA-S03B Actual Photo: