How the carbon deposit forms:

When the auto engine works, the fuel oil and a small amount of lubricant which enters into combustion chamber could not
burn completely, therefore, under the circumstance of high temperature and oxidation, the unburned part of oil converts into colloid adhering to the intake valve, intake manifold, piston or the surface of combustion chamber, furthermore, under high temperature, it solidifies into a asphaltene-oil coke mixture, which is carbon deposit.

C8H18+O2→CO+H2O——(incomplete combustion)→CO2+H2O——(complete combustion)

The carbon deposit is formed at spark plug, cover and cylinder head due to incomplete combustion

Chemical equation

:
C8H18+heat(high level combustion)→C+H2+CxHy——(carbon deposit)

Hazard of carbon deposit :

The carbon deposition causes abnormal emission, increase of fuel consumption, idle vibration, powered lowering, easy
engine stops and difficult engine starts, furthermore, the lifespan of TWC, oxidation sensor and spark plug will be shortened, if severe carbon deposition occurs, it may cause the intake valve burnt or adhered, preignition, deflagration, engine knock, cylinder scoring to damage the engine cylinder.

Working principle :

Under the ambient temperature and atmospheric pressure, the hydrogen is conveyed directly into the combustion chamber of the operational engine, in which, the hydrogen is converted into hydrogen ions and burning with the carbon deposit and oil sludge to generate carbon dioxide and water, so as to remove the carbon deposit effectively and clean the engine as well. The hydrogen is converted into hydrogen ions in a certain condition H2→2H+

The high activated hydrogen ions combined with carbon
deposit and oil sludge in the combustion chamber are
converted into carbon dioxide and water which is discharged with the car exhaust:
C+H+→CxHy
CxHy+O2→CO2+H2O

Technical Parameters

Features

The advanced “PEM” technology is applied to this machine which electrolyzes pure water to generate 99.99% purity hydrogen, and controlled by microcomputer, neither backfire nor explosion is occurred. This safe and reliable machine is the best one for cleaning car engine. 

Key Features

l Microcomputer control system that enables automatic operation;

l Intellectual control to detect the engine stop

Easy and Safe Operation

l Controlled by microcomputer and automatic operation that is reliable, stable and safe;

l Without any catalyst, only pure water (secondary distilled water) is needed to generate gas under atmospheric pressure;

l Directly connect to the intake manifold of the engine without dismantling the engine,

l Unnecessary to replace the grease or grease seal, and zero cost of replacing consumables or dismantling parts.

l Safe and efficient maintenance, only need to change drying agent which can be recycled 

Timesaving 

The operation time is varied depending on different car engine:

l 40 minutes for >2000cc; 

l 20 minutes for ≤2000cc

Economy

Only fill with pure water (secondary distilled water). Water consumption is less than 90ml/h. Power consumption less than 0.6KWh each time

Effective

After using our machine to clear the carbon deposit and oil dirt in the car engine, the horsepower will be increased and the oil consumption will be reduced. It brings you a comfortable driving experience. 

Green and Environmental protection

l After cleaning carbon deposit in the engine, the waste gas emission and the environmental pollution is reduced.

l No reagent is needed and no pollution to the environment. Protect the operator’s health.

Comparison with other engine cleaning machine

Testing Spots:

Customer Visiting:

CE Certification:

After Sale Service:

A Gloabal call center to support you , any question will reply soon within two hours.

--24 hours hot phone line support.

--24 hours email support.

--24 hours phone message support.

--24hours msn and skype support.

--1 year warranty and technical support for all life.

--the core part of the machine will free change within one year.