Auto Sliding Door System
Sectional View,
Intelligence,
a)controlled by the automatic sliding door microchips , giving the control unit multiple programmable modes including provision to interface with builidng security system, monitoring the doors position status,built-in UPS,etc
b)The microprocessor operating parameters can be adjusted to accommodate various climatic conditions and can ajust the speed ,brake ,position etc.
Safety,
a)safety beam sensor protection
b)Auto-reversing when confronting with obstacle
c)UPS when power fails, it can let the door open in urgent situations or you can open it by hand
d)In case of emergency ,the door can keep open and stay there to aid escape
e) The microcontroller also provide the interface for alarming system ,safety system ,etc
f)Fuse protection at 1A, 250V
Reliability,
Thanks to professional mechanic design and high-efficiency DC brushless motor, the sliding operator can work very well with low noise for a long time. With the help of advanced synchronous belt and perfect design of power supply circuit , the door moves very stably.
Energy Saving,
With half open function and the remote control , you can control the door opening width .so this can help to keep the temperature and humidity inside the room and to minimize the costs of the air conditioner as well
Glass Door System Specification,
Door model | Single | double panels |
Door width | 700-1300mm | 600mm-1250mmn |
Door weight | 120kg | 120kg x 2 |
Opening speed | 15cm-50cm/s | 15cm-45cm/s |
Clsosing speed | 10cm-45cm/s | 10cm-43cm/s |
Hold on time: | 0-9s |
Motor | brushless 24 volt DC,55W ,high torque 2500r/min |
Microcontroller | PLC techniques and 8 bit Microchip MCU,automatic door microchips |
Power supply | 110V-250V,60Hz/50Hz |
Profile size | 4200mm(L)x 128mm(H)x100mm(W) |
Glass Door System Components,
Retro-fit kit |
1 | Motor & Gearbox | 1pcs | China-made 24V,55W ,DC bruthless motor |
2 | Microcontroller | 1pc | 8 bit Microchip chip |
3 | Radar | 2pcs | Bea MW6 radar |
4 | Learning code remote controller | 1set | Hold-open,lock,exit only, partial-open |
5 | Carriage | 4pcs | 2 running wheel |
6 | Tooth belt | 1pc | 8m, fiberglass tensile elements, nylon surface |
7 | Belt clamp | 2pcs | |
8 | Idle pulley | 1pc | Aluminum alloy |
9 | Stopper | 2pcs | Aluminum alloy |
10 | Connection termial | 1pc | For 220V power ,and outside sensor connection |
Profile |
1 | Track | 1pc | 3mm thickenss, Anodize, height 125mm, depth 100mm,length 4200mm |
2 | Cover | 1pc | 170mm height,anodized |
Options |
1 | safety beam sensor | 1set | factory made |
2 | Electro-mechanical lock | 1set | 12V,time delay |
3 | Emergency battery | 1set | 12V,7Ah,contiunously working half an hours |
4 | Control panels | 1set | LCD display, key swtich,5 program adjust |
5 | Floor guide | 2pcs | For frame and frameless door |
6 | Glass clamp | 2pcs | 1m length, fit to 10mm,12mm glass |
Installation Project (In Romania),
....