Combustion efficient semi-circular design
The cylindrical design in this incinerator ensures uniform heat transfer which results in uniform burning and very good combustion.  Possibility of un-burnt materials in this incinerator design is vastly reduced.

No cold spots
A rounded shape in the incineration chamber generally gives more uniform heat flow and transfer rather than a square shape which has sharp corners.   

No internal wearing parts
This incinerator does not have any internal slabs or components which are subjected to heat wear.  It is therefore designed for maintainability without the need to replace any wearing parts during its life time.

Optional secondary burner operation
Though a secondary burner is made available with this type of incinerator, it only needs to be operated when a greater volume of flue gas is generated by some wastes.  This will result in better emissions.  The secondary burner can be switched off to conserve energy and not used when not required.

Top loading
A door provided on top of the primary chamber of the incinerator acts as a loading door and another door at the bottom of the chamber serves as a de-ashing door enabling easy leading of waste and ash removal as well as inspection.

One time `load and forget`
This incinerator is also designed for one time loading unlike a batch type which needs to be loaded every 10 or 15 minutes.

Capacities
From 10 kg/h to 500 kg/h, any incinerator capacity in this range can be supplied.

Accessories
    Chimney
    Instrumentation

Waste types
     Animal / slaughter house waste incinerator
     Animal shelter incinerator
     Animal Testing House incinerator
     Confidential documents incinerator
     Food waste incinerator
     Holy books / flags incinerator
     Medical or bio medical waste incinerator
     Municipal / garbage waste incinerator
     Poultry waste incinerator
     Sanitary napkins incinerator