1)We have 18 years experience in exporting casting parts such as ingot molds,sow molds,slag pans,dross pans,skim pots,slag pots & anode yokes for Aluminum Remelters & Casthouses . Most of our end users(Such as Alcoa) are from Canada,Australia,USA,Germanny & England.

2)Customer Designed & Standard,such as LP1200,LP1500,LP1650,LP2000,LP2300,LP3200,LP4500(Sow Mould)

Two-Claw/Pin,Three-Claw/Pin ,Four-Claw/Pin,Six-Claw/Pin,Eight-Claw(Anode Yoke) 

3)Casting Process:Sand casting, V-process casting, Lost foam casting

3).V-Process Casting. We are able to produce these products below 2.5 Metric Tons via V-Process Method.An vacuum process automatic moulding and production line has been buit up here early 2012 and much more larger castings can be casted then. Compared with sand casting,V-Process castings have lots of advantages:

A.  Low Operation & Tooling Cost

B.  Tight Tolerances

C.  Fine Finish Surfaces(Fine surface is very important for removing sows or ingots from the moulds)                            

D.  Quick Turnarounds and Short Lead Times.

E.  Thin-Wall Capability.

F.  Unlimited Pattern Life

4).Castings between 50kgs to 10 000 kgs are available here.

5).Material: Carbon Steel,Alloy Steel,Stainless Steel, Ductile Iron of All Standards or  Customer Specifications.

Feel free to contact us if you are interested in our products or want to know more about us!

Thank you!