Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Home
>Tools & Hardware » Tools » Power Tools » Blower
Add to wish list
+ Add a New List
Active Magnetic bearing turbo blower for industrial wastewater treatment
Active Magnetic Bearing Turbo Blower For Industrial Wastewater Treatment , Find Complete Details about Active Magnetic Bearing Turbo Blower For Industrial Wastewater Treatment,Electric Turbo Blower,Wastewater Treatment,Blower For Dust Collector from Blower Supplier or Manufacturer-IT&T (Shanghai) Co., Ltd.
$1 /
Product Details
Transaction Comments
AMB(Active Magnetic Bearing) Turbo Blower
Our AMB blower specially designed for wastewater treatment adopts AMB system to make the aeration efficiency reach the highest level. The simple operation and stable running status can bring the comfortable operating environment to the operators.
AMB Turbo Blower uses active magnetic bearing technology and technology of PMSM high-speed permanent magnet synchronous motors, which is a new type of energy efficient and environmentally friendly product using integrated design.
-Features
•Friction-free——No lubrication, low energy consumption
•Low vibration——Stable and efficient working condition
•Low noise——Undisturbed working environment
•Mature technology——Long service life span
•Simple structure——Small footprint and easy installation
•Intelligent monitoring——Simple operation and high efficiency
-Working principle:
-Core components:
1. Built-in inductive sensor will detect location of spind
-Application:
1. Municipal and industrial wastewater treatment plant: provide air for aeration tank of wastewater treatment plant.
AMB Turbo blowers can provide the sufficient air volume and pressure with very low energy consumption. In the wastewater treatment industry where the blowers make up nearly half of the total energy consumption, selecting energy-saving blowers can bring the enormous economic benefits to the enterprises.
2. Cement, chemical, food factories: pneumatic transmission like industrial ingredient, dust, raw-food material, etc.
3. Others: provide air for reaction in smelting plant and clean air for semiconductor production line’s air knife equipment.
-Product superiority
1. Environmental protection
2. Adoption of advanced technology
3. Low operating cost
20-year Total Cost Comparison
-Specifications
Overall parameters | Type | FLC13338 | |
Species | Single-stage turbo blower | ||
Weight | 1550 Kg | ||
Dimension /L*W*H | 2000 mm * 1200 mm * 1600 mm | ||
Outlet diameter | DN125(GB) | ||
Noise level | ≤85 dB(A) | ||
Operational efficiency | 70~79% | ||
Environmental requirements | Inlet air temperature | -30~50℃ | |
Inlet air relative humidity | 0~95% | ||
Highest temperature | 60℃ | ||
Highest humidity | 95% | ||
Fluid parameters | Media | Air | |
Environment temperature | 20℃ | ||
Environment humidity | 70% | ||
Air flow | 45~85 m3/min | ||
Dis. Pressure | 45~85 kPa | ||
Control system | Language | Chinese / English / Korean optional | |
Operation | Control Panel, PC, remote PC | ||
Control content | Speed control, flow control, Troubleshooting | ||
Monitoring content | Flow, pressure, rotational speed, motor power, outlet temperature, motor status, magnetic bearing status. | ||
Motor | Rated power | Up to 100 kW | |
Max. speed | 30,000 RPM | ||
Rotation accuracy | 10 μm | ||
Cooling method | Water, air cooling | ||
Protection level | IP55 | ||
Insulation level | C | ||
Motor efficiency | 96%( 100% load) | ||
Start-stop mode | Inverter soft start and soft stop | ||
Magnetic bearing | Bearing type | Active magnetic bearing | |
Cooling method | Air | ||
Controller | Power amplifier | 10ch (PWM) | |
Signal Conversion | A/D 6ch D/A 4ch | ||
Position sensor | Sensor type | Inductive sensors | |
Accuracy | 1μm | ||
Channel | 6ch Radial 4ch,Axial2ch | ||
Others | Uninterruptible Power Supply(UPS) | Capacity | 400 W |
DC power supply | Specification | DC 200V 5A | |
Inverter | Frequency range | 0-500 Hz | |
Power | 120 kW | ||
Configuration list
Name | Place of origin | Quantity | Remarks | |
Mechanical components | Radial magnetic bearing | CN | 2 | FG-AMB |
Thrust magnetic bearing | CN | 2 | FG-AMB | |
Position sensor | CN | 2 | FG-AMB | |
High-speed permanent magnet motor | Kor. | 1 | GEM | |
Impeller | CN | 1 | AL7075 Aviation aluminum | |
Shaft | CN | 1 | SCM440 Nickel alloy | |
Housing | CN | 1 | ZL101 Cast aluminum alloy | |
Electrical components | AMB controller | Kor. | 1 | FG-AMB |
Flow control system | Kor. | 1 |
| |
DC power supply | CN | 1 |
| |
Inverter and PLC | Kor. | 1 | KL Power | |
Control Panel | CN | 1 | Chinese / English / Korean optional | |
UPS (including transformer) | CN | 1 |
| |
Temperature sensor | CN | 1 |
| |
Pressure sensor | CN | 1 |
| |
Electrical cabinet | CN | 1 | plastic-spray | |
Cooling System | Water tank | CN | 1 |
|
Water-cooled machines | CN | 1 |
| |
Turbo blower | CN | 1 |
| |
Others | Inlet filter | CN | 1 |
|
Inlet / outlet silencer | CN | 1 | Optional | |
Outlet elastic connector | CN | 1 | Optional | |
By-pass valve | CN | 1 |
| |
Integration noise enclosure | CN | 1 |
| |
Local control switch | CN | 1 |
| |
Relevant documents: Instructions, layout diagram,circuit diagram | ||||
Other products from this supplier
Back to top
