9mm dual concentric shaft rotary potentiometer
Electrical Characteristics | Total Resistance | 1kΩ~500kΩ |
Total Resistance Tolerance | ±20% |
Resistance Taper | A,B,C,D,etc |
Max.operating Voltage | AC50V.DC10V |
Rated Power | Liner Taper B:0.05W Other Taper:00025W |
Sliding Noise | Less than 100mv |
Insulation Resistance | More than 100MΩ at DC 250v |
Withstand Voltage | 1 minute at AC 300V |
Residual Resistance | Term.1~2:Less than 20Ω Term.2~3:Less than 20Ω |
Gang Error (Dual Unit or Multi Unit) | -40dB~0dB±3dB |
|
Mechanical Characteristics | Total Rotational Angle | 300°±10° |
Rotational Torque | 5gf.cm~120gf.cm |
Click Torque | 50gf.cm~200gf.cm |
Rotational Stopper Strength | 4.0Kgf.cm Min. |
Push -Pull Strength | 6.0Kgf. Min |
Bushing nut tighten strength | 8.0Kgf.cm Min |
Number of detents(click) | 1C (Center Detent),11C,21C,41C |
|
Durability | Operating temperature range | -10°C~+70°C |
Storage temperature range | -30°C~+80°C |
Rotational Life | 15,000 Cycles |
|
Switch Characteristics | Contact resistance | Less than 100mΩ |
Switch rated power | 3.0A at DC 16v |
Switch push stroke length | 0.5+0.7/-0.3mm |
Switch rotational Angle | 50°Max |
Switch torque | Push:200~800gf Rotational:500gf.cm Max |
Switch circuit | S.P.S.T&D.P.S.T |