Product discription:

1.PCBA: Over charge limit per cell is 4.25V±0.05V, Over charge recovery voltage per cell is 4.1V±0.05V, Over discharge limit per cell is 2.8V±0.05V, Over discharge recovery voltage per cell is 3.0V±0.05V, Over charge current protection is 6A~10A, Over discharge current protection is 6A~10A, Maximum current comsumption is 20uA

2.The discharge low voltage protection will start up when the cell voltage less than 3V, now press the button, LED light is inoperative and no output, then need to charge to activation.

3.Fully charged, discharge with load 5A, the time isn’t less than 105 minutes;Charging by 16.8V 2A adapter when discharging completely, the time less than 6 hours.

Features:

1. The protection module adopts the S-8204BAS-TCT1Y to monitor Li-Ion cell for over-voltage, under-voltage, over-charge current and over-discharge current.

2.  External FET ME7170 will be driven to cut off the loop of charge and discharge if any abnormal condition occurs.

3.100% brand new and Strict requirements for production process, must have accurate capacity calculation function, and the consistency of the battery match.

4.Finished product via professinal tested. Commited provide high quality product to our customer.