3L/min High Output Portable Oxygen Concentrator
Contents And Functions Of The Machine Panel
1, LED indicator light
From right to left, there are 8 lights, which act as follows:
(1) power indicator light: emerald green light
(2) power off alarm lamp: red light
(3) temperature / high voltage alarm indicator (multiplex indicator):
High temperature alarm: the temperature in the machine is 50 degrees centigrade, the red indicator is on, and the alarm is continuous, and the temperature is displayed on the LCD panel;
High voltage alarm: red indicator flashing, intermittent alarm sound.
(4) low voltage alarm: yellow indicator lamp is always bright and has continuous alarm sound.
(5) alternate indicator light;
(6) high oxygen concentration indicator: when the concentration of oxygen is higher than or equal to 85% (error + 3), the blue indicator light is on
(7) alternate indicator light;
(8) low oxygen concentration indicator: when the oxygen concentration is below 85% (error + 3), the red indicator light is on
2, LCD LCD screen
The first row shows the running pressure, the second line shows the temperature, the third line shows the time / timing (the first four represents the hour, the last two represents the minutes), and the fourth line shows the cumulative run time (by the hour meter).
3, button
(1), when the machine boot after 15 minutes into the screen saver mode, if you press the "print" button on the machine running the process, the LCD screen will re light for 15 minutes.
(2), "long" and "you" the two keys used for timing, according to the "long" increase, amounting to less units by 10 minutes. As amounting to reduced to 0, the machine automatically shut down, then press "*" machine will reboot; if the machine runs automatically after the timing time after shutdown, press the button to start.
4, knob
(1) flow meter adjusting knob.
(2) atomizing adjusting knob;
Function and standard allocation of oxygen generator
1, PSA physical oxygen production, economic security;
2, the oxygen flow rate can be adjusted continuously, the oxygen concentration is 93 + 3%;
3, digital LCD LCD screen, display machine operation parameters information;
4, timing function: the end of time, the machine automatically stop running, save energy, worry;
5, France imports molecular sieve, American import wet bottle;
6, oxygen concentration monitoring function, timely monitoring the level of oxygen produced by the machine
7, continuous operation oxygen concentration has no obvious attenuation, the machine has no peculiar smell;
8 , automatic alarm: power off alarm, high and low pressure alarm, temperature alarm, low oxygen concentration alarm
9, through the German Rhine testing certification service (China) Co., Ltd. according to the European Union (EN60601-1:1990+A1:1993+A2:1995, EN60601-1-2:2007) standard test, and obtain "CE" certificate;
10, through the United States FDA audit, access to FDA certification;
11, all parts meet the EU standards;
12, the technical parameters meet the international standard for medical oxygen generator;
Our Advantage
1.Intelligent alarm display function, high safety, put an end to all kinds of security risks
* power failure alarm, the machine does not connect the power or no electricity, will alert the police;
* high pressure alarm and low voltage alarm, the machine LCD screen often shows the machine running pressure value;
* high temperature alarm, that is, the internal temperature of the machine, and the LCD screen also shows the actual temperature of the operation of the machine, so as to effectively control the overheating of the machine, to ensure that the machine running 24 hours without heating;
* low oxygen concentration alarm, that is, according to the latest national standard, the molecular sieve oxygen generator must carry oxygen concentration monitoring function, when the oxygen concentration is below 82%, the machine alarm;
* wet bottle / oxygen tube blocked alarm, that is, when oxygen tube blocked, from the humidifier bottle loud alarm sound, remind the user to check the oxygen tube.
2.It can be operated continuously for 24 hours and 365 days with stable performance
The cooling of an oxygen generator is very important and must be rigorously calculated. Why?
A in industry, the attenuation of temperature to machines is exponential;
b The high temperature of B zeolite is favorable for resolution and low temperature is favorable for adsorption;
c With the addition of a little bit of C temperature, the requirements for various accessories and data will increase exponentially,
Therefore, the general oxygen machine will not show the machine running temperature, because it shows the temperature, it must expose a lot of accessories the use, technique, etc.PAIGE oxygen machine according to their information of the machine (molecular sieve, compressor, various material accessories).Strictly calculated using copper tubes, aluminum fins, and a specific 17W fan. Copper tubes are made of medical grade copper tube, which is resistant to high temperature and high pressure
The density is 8.96, the melting point is 1083 degrees Celsius, and the temperature is no more than 5 degrees. It is shown on the screen. General domestic the machine adopts aluminium tube, the fan is 10W in general, and the temperature is not displayed on the screen.
This is our internal of oxygen generator
Other suppliers
3. Stable oxygen equipment sensor
Send Inquriy and please bring the following description, we have more models to recommend to you. Thank you!
Technical Information | Your Technical Requirement |
Capacity | L/min |
Purity | % |
Qutlet Pressure | Mpa or Bar |
Power | V/HZ |
For Inquiry pls contact:
Quaintqu
Sales Manager
Cell: +86 18961603007
Whatsapp/Skype: +86 15251596978