Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
SPECIFICATION | ||||
OUTPUT | ||||
Model | WXESD-350C | |||
DC Voltage | 5V | 12V | 24V | 48V |
Rated Current | 60A | 27.5A | 14.6A | 7.3A |
Current Range | 0~60A | 0~27.5A | 0~14.6A | 0~7.3A |
Rated Power | 300W | 330W | 350.4W | 350.4W |
Ripple & Noise | 100mVp-p | 120mVp-p | 150mVp-p | 200mVp-p |
Voltage Adj. Range | 4.5~5.5VDC | 11~16VDC | 23~30VDC | 43~53VDC |
Voltage Tolerance | ±2.0% | ±1.0% | ±1.0% | ±1.0% |
Line Regulation | ±0.5% | ±0.3% | ±0.2% | ±0.2% |
Load Regulation | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
Setup, Rise Time | 300ms,50ms at full load | |||
INPUT | ||||
Voltage Range | 36~72VDC | |||
Efficiency | 76% | 81% | 81% | 82% |
DC Current | 7.6A/48V | 8.8A/48V | 9.0A/48V | 9.0A/48V |
Inrush Current | 45A/48VDC | |||
PROTECTION | ||||
Over Load | 105~135% rated output power | |||
Protection type: Shut down o/p voltage,re-power on to recover | ||||
Over Voltage | 5.75~6.75V | 16.8~20V | 31.5~37.5V | 53~65V |
Protection type: Shut down o/p voltage,re-power on to recover | ||||
Over Temperature | 95ºC± 5ºC(TSW1) detect on main power transistor | |||
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | ||||
ENVIRONMENT | ||||
Working Temp. | -20~+60ºC (Refer to "Derating Curve") | |||
Working Humidity | 20~90%RH non-condensing | |||
Storage Temp., Humidity | -40~+85ºC,10~95%RH | |||
Temp. Coefficient | ±0.03%/ºC (0~50ºC) | |||
Vibration | 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||
SAFETY & EMC | ||||
Safety Standards | IEC60950-1CB approved by TUV(for D type only) | |||
Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
Isolation Resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH | |||
EMC Emission | Compliance to EN55022(CISPR22) Class B | |||
EMC Immunity | Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A | |||
OTHERS | ||||
Dimension | 215*115*50mm(L*W*H) | |||
Weight | 1.1Kg | |||
Packing | 12pcs/14.4Kg/0.92CUFT | |||
NOTE | ||||
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |