KA-SLH20 2017 New Design infra red sensor lamp holder specifications:

1.Automatically turns light on when motion is detected, then turn light off within 30-300 seconds after you leave.                                 2.The motion sensor with flexible wire can be bent to any direction,so it can be installed on the deep ceiling down light.                   3.With light sensor,only work when the ambient brightness is not strong enough(less than 10Lux)                                                       4.Suitable installation height: 2.5-3M,                      

5.360 detection zone                                            

6. 220-240V~/50Hz(120V~/60Hz)                            

7.Max load power: 60W( normal bulb); 20W ( CFL or LED lamp)

Package:

1) White box or customized color box

2) Carton size: 32*321.5*24cm

3) Gross weight:7.0KGS

4) Quantity/carton:50pcs

KA-SLH20 introduction:

With red-ray-through infrared sensor and Lenses, can fast detect the weak infrared ray from body. Automatically turns light on rapidly when motion is detected, off some delaying time after you leave. Widely used in the gangway, aisle, elevator door and washing room of household, enterprises, hotels, hospital, school, business office building, basement, warehouses, residential sub-district etc.
Promoting sustainable living through simple products that save money, energy and valuable resources.

Installation and operation:

1) First, turn off light switch
2) Next, screw our motion sensor adapter into any existing ceiling light socket, then screw bulb into the motion sensor adapter.
3) Turn the light switch on. The motion sensor adapter enters normal work mode after about 40S infrared warm-up time for first installation and switch on power (The bulb may be lightened several times during the 40S, this is common phenomena).
4) Following, automatically turns light on rapidly when motion is detected, off 15-120S delaying time after you leave.Suitable installation height from floor: 2.5-3M

KA-SLH20 Actual photos: