Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Model: 18650/3S3P Li-ion Battery Pack 11.1V/8.4AH | |||
Item | Specification | Remark | |
Nominal capacity | 8400mAh | 0.5C discharge Cell: 18650 | |
Nominal voltage | 11.1V | 3.7V / 1Cell | |
Charging voltage | 12.6V±0.05V | 4.2V / 1Cell | |
Charging method | CC/CV | (Constant-current and -Voltage with Limited current | |
Standard charging time | 2000mA/4hour , 3000mA/2.5hour | Battery capacity÷charging current×1.5 | |
charging current | 3000mA ( 0.4C ) | 0 ~ +40 °C | |
Maximum charging current | 8400mA ( 1C ) | 0 ~ +40 °C | |
Continuous discharge current | 8400mA ( 1C ) | -20 ~ +60 °C | |
Discharge cutoff voltage | 7.2V | 2.4V / 1Cell | |
Short circuit protection | Exterior short circuit | Automatic recovery | |
Internal resistance | ≤ 200mΩ | AC Impedance 1kHz | |
Cycle life | ≥5 00 | ||
Operating temperature | Standard Charge | 0 ~ +40 °C | |
Standard Discharge | -20 ~ +60 °C | ||
Outline dimension | L92*W18*H71mm | Length x wide x height | |
Pre-wired | Red = Positive,Black = Negative | ||
Protection Circuit Module:PCM-Li03S8-069 | |||
Maximal continuous charging current | 8A | ||
Maximal continuous Discharging current | 8A | ||
Over-charge detection voltage | 4.35V±0.025V | single cell | |
Over-charge release voltage | 4.15V±0.05V | single cell | |
Over-charge detection delay time | 0.5S_1.5S | single cell | |
Over-discharge detection voltage | 2.40V±0.08V | single cell | |
Over-discharge release Voltage | 3.0±0.10V | single cell | |
Over-discharge detection delay time | 50_150mS | single cell | |
Over-current detection | 20±3A | can adjust | |
Over-current delay time | 5_15mS |