Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Electrical characteristics | |
Total Resistance | 500Ω~500KΩ |
Total Resistance Tolerance | ± 20% |
Resistance Taper | A, B, C, D, ect. |
Max. Operating Voltage | Linear Taper B: AC 150V; Other Tapers: AC 100V. |
Rated Power; Linear Taper B | 0.1W; Other Tapers: 0.05W |
Sliding Noise | Less than 100mV |
Insulation Resistance | More than 50MΩ at DC 500V Withstand voltage: 1 minute at AC 300V |
Residual Resistance | Term.1~2: Less than 20Ω |
Term.2~3 | Less than 20Ω |
Gang Error (Dual Unit) | -40dB~0dB ± 3dB |
Mechanical characteristics | |
Total Rotational Angle | 300°± 1 0° |
Rotational Torque | 10gf.cm~100gf.cm |
Rotational Stopper Strength | 3.0Kgf.cm Min |
Push-Pull Strength | 5.0Kgf Min |
Click Position | 1C, 11C, 21C, 41C |
Click Torque | 30gf.cm~300gf.cm |
Switch characteristics | |
Switch Contact Resistance | Less than 50mΩ |
Switch Rated Power | 2.0A at AC 125 V |
Switch Rotational Angle | 30°± 10° |
Switch Torque | 150gf.cm~500gf.cm |
Durability | |
Rotational Life | 10,000 Cycles |