11KW cast iron stove, iron plate wood burning stove
Product Description
Specification
Model No. | BH02-11KW(S) |
Size(h*d*w) | 655*400*650mm |
Weight | 130kg |
Power | 11kw |
Materail | cast iron |
Fuel | wood, coal, Other solid fuel |
Efficiency | 78% |
Paint color | Graphite |
Technical skills | Air wash system |
Flue exit
Chimney dimeter | 6 inch |
Chimney position | top & rear of the stove |
Flue colar | with doulbe layers flue colar |
Accessories
Glass type | High-temperature resistent type |
Instruction Manual | Customize |
Brand/logo | OEM and ODM are available |
Other accessories | Ashpan handle,glove,brush |
Packaging & Shipping
Packing details | Bubble Wrap+Carton+Plywood Case; Customize |
Delivery detalis | 25-35Days |
Our Services
Problem | Probable cause | Corrective action |
Fire difficult to start Fire goes out | Wood, too damp or poor quality | Use the recommended fuel |
Logs are too big | To light the fire,use small,very dry twigs. To maintain the fire,use split logs. |
Air lack | Open lower spin wheel and top air control lever. |
Insufficient draught | Check that the flue is not blocked sweep it if necessary. Seek advice from a chimney specialist |
Fire burns too quickly | Too much draught | Ensure that the lower spin wheel is closed. Partially close the top air control lever. |
Excessive draw | Install a draugh stabilizer. Consult your delar. |
Poor quaity wood | Do not continuously burn small wood, sticks, bundls, carpentry off-cuts(plywood,pallets),etc. |
Smokes when lighting up | Flue duct is cold | Burn paper and kindling wood to increase heat. |
Room is in decompression | In houses equipped with mechanical ventilation,partly open a window until the fire is well estabished. |
Smokes whle burning | Draugh is insufficient | Consult a chimney specialist. Check that the flue is not obstructed, sweep if necessary. |
Down draught | In house equipped with mechanical ventilation, partly open a window until the fire is well established. |
Room is in decompression | In house equipped with CMV,an outside air intake must be installed for the chimney. |
Low heat output | Incorrect Fuels | Use the recommended fuel. |
FAQ
Q:1.Will your packing be strong enough for the transportation?
A: We still insist Outer packing:3cm standard wooden crate; Inner packing: foam or blanket to protect each carving part. All that guarantee the safety of goods during any transportation.
Q:2.The size of your products can not meet my requirements, but I like the style, can you custom the size for me?
A: We are very good at custom-made products, No matter what size, style or material, all can be custom-made according to your requirements, what you need to do is to tell us your requests details.
Q:3.If my goods is broken when I get it, what should I do?
A: Please take several photos of the packing before you open it. If the packing is okay, but goods are broken, it is our responsibility. On the contrary, if the packing and good are both broken, it is the logistic company’s responsibility.
We promise no matter whose responsibility it is, as long as the goods is broken, we will try our best to send you a new one in the shortest time freely.
We are confident that we shall be able to give you the best service and products. Please feel free to inquire us at any of your convenience.