- Model NO.: D1003A
- Card Type: Mifare, EM
- Reading Distance: Within 10cm
- Color: Black or White
- Warranty: 1 Year
- Communication: TCP IP
- Transport Package: 1 PCS Smart Card Reader Per Gift Box
- Origin: Shenzhen China
- Type: ID Card Reader
- Interface: Wiegand 26 Wiegand 34
- Application: Parking, Hospital, Library, Company, Bank, Store
- Door Control: One Door
- Frequency: 125kHz or 13.56MHz
- Trademark: Dwell
- Specification: 88*88*20mm
- HS Code: 8471900090
125khz em id wiegand 26 keypad access control rfid smart card reader
Product Description
D1003A 5 to 10 cm short range 125 KHz reader with wiegand 26, wiegand 34 protocol
Specification
Wiegand 26bits/ Wiegand34bits Standard Format Data Output
Less than 0.2 second Response Speed
5-10cm Proximity Range
Ambient Temperature: -25º C to 75º C
Ambient Humidity: 10%-90%
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
With Water-Proof Function
Audiovisual indication: When a registered card is presented to the reader, the red
LED flashes green and the beep sounds.
88*88*20(mm)
Packing List:
1*RFID Reader
100pcs per carton. Carton Size: 43.5*56*23(cm)
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)
Orange Door Bell
Grown Door Bell
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
Photo
Application
Wire diagram
